The Cover Valet™ is one of the most trusted premium spa cover lifters available today. Its compact design works in almost any backyard setup, whether it is installed inside a gazebo, placed close to a wall, or mounted onto an existing deck. Dual gas springs provide smooth, assisted lifting so the cover opens and closes with very little effort. A built-in safety lock keeps the cover open until you are ready to lower it again.
The system is finished with a durable powder coat and supported by zinc plated hardware, giving the Cover Valet long-lasting performance and reliability. It is backed by an industry leading five year warranty.
- The most widely used cover lifter in the industry.
- Mounts to spa cabinet or directly to deck for recessed spas.
- Dual gas shock assisted.
- Works inside most gazebos and closures.
- When cover is open, it doubles as a privacy wall.
- Options: CV250 for covers up to 91” and CV400 up to 104”
- Durable zinc plated and powder coated finish.
Cover Shapes: Square / Rectangle
Mount Style: Screws into cabinet or deck
Fits Cover Sizes Up To: 104” (264 cm)
Rear Clearance: 6-8” (15-20 cm)
Side Clearance: 2.5” (6 cm)
Shock Assisted: YES
Compatible With Inground Spas: YES
Spa Height: ALL HEIGHTS
Swim Spa Compatible: Yes
Spas with radius corners greater than 12” require the Cover Valet XL Side Mount Bracket to meet the following installation requirements:
- the back edge of the Channel Bracket should sit 2” in from the back face of the spa
- the Channel Bracket should be fastened to the Side Mount Bracket with at least 4 bolts
- the Side Mount Bracket should be fastened to the spa cabinet with at least 4 lag screws
This extended 40” Side Mount Bracket is sold separately through your Cover Valet dealer or at www.covervaletparts.com
Any Cover Lifter shown to be unserviceable due to defects in materials or workmanship within five years from date of purchase will be repaired or replaced, at the option of Cover Valet, without charge for materials.