
The Cover Valet Pro™ is built from all-aluminum materials and reinforced with dual gas shocks for smooth, steady lifting. A full center bar runs across the cover seam for added stability. It needs just 6″ of clearance behind the spa and 2.5″ on the sides, and fits square or rectangular hot tubs up to 104″.
The Pro arrives ready for either cabinet-mount or deck-mount installation, with all hardware included. A powder-coated finish, zinc-plated fasteners, and a strengthened frame help the lifter hold up through years of regular use. It’s also protected by a 5-year industry-leading warranty.

- Full span crossbar for added stability.
- Dual gas shock assisted.
- Zinc-plated and powder coated finish.

Cover Shapes: Square / Rectangle
Mount Style: Screws into cabinet or deck
Fits Cover Sizes Up To: 104” (264 cm)
Rear Clearance: 6-8” (15 – 20 cm)
Side Clearance: 2.5” (6 cm)
Shock Assisted: YES
Compatible With Inground Spas: YES
Spa Height: ALL HEIGHTS
Swim Spa Compatible: YES

Spas with radius corners greater than 12” require the Cover Valet XL Side Mount Bracket to meet the following installation requirements:
- the back edge of the Channel Bracket should sit 2” in from the back face of the spa
- the Channel Bracket should be fastened to the Side Mount Bracket with at least 4 bolts
- the Side Mount Bracket should be fastened to the spa cabinet with at least 4 lag screws
This extended 48” Side Mount Bracket is sold separately through your Cover Valet dealer or at www.covervaletparts.com



Any Cover Lifter shown to be unserviceable due to defects in materials or workmanship within five years from date of purchase will be repaired or replaced, at the option of Cover Valet, without charge for materials.

